EU delivery from € 17.95 Stock items ordered before 14:00, dispatched the same working day Delivery across the EU WebwinkelKeur certified Pay securely by card & Klarna
★★★★★8,8/1052 reviews · WebwinkelKeur verified“snelle levering” — Jan Fakkeldij“Motor bedteld voor kunsthaard. Zeer duidelijk welke ik moest bestellen en zeer snel thuis.” — Bert RoosenburgAll reviews →

Agpo Ferroli spare parts

Original parts for all Agpo Ferroli appliances. Choose your model below for the complete parts list (often with an exploded view) and order directly.

In brief

Instalpunt supplies 313 original Agpo Ferroli parts for 94 models, with part number, price and exploded view. Order online.

  • 313Spare parts
  • 94Models
  • €1.31From

Agpo Ferroli parts by type

Looking for a specific type of part? For each type, all Agpo Ferroli spare parts are listed with price, stock and the models they fit.

Agpo Ferroli hot water cylinders

Agpo Ferroli boilers

Agpo Ferroli district heating units

Agpo Ferroli MVHR units

Agpo Ferroli fault code? This is the part you usually need

Your Agpo Ferroli appliance is showing a fault code? Below you can see, for common codes, which part is usually the cause – ready to order.

Fault codeWhat is going onPart
1Heating indirectly fired hot water cylinder, pump overrun: hot water modeView pumps
2Heat demand for central heating / pump overrunView pumps
5Insufficient combustion air or condensate drain blocked.View siphons
A 01No ionisationView electrodes
A 02Too little ionisationView electrodes
A 04Gas valve relay defectiveView gas valves
A 08Glow plug relay defectiveView electrodes
A 1No ionisation signal (during ignition)View electrodes
A 16No ionisation signal after 1 minuteView electrodes
A 19No flame extinction after gas valve closesView gas valves
A 2High-limit thermostat trippedView thermostats
A 20Flame detected with burner off.View burners
A 3Excessive flue gas temperature detected 3 times within 24 hours. This sensor is fitted as standardView sensors
A01No ionisation signal during ignitionView electrodes
A05Fan errorView fans
A1No ionisation signal during ignitionView electrodes
A16No ionisation signal after 1 minuteView electrodes
A2High-limit thermostat trippedView thermostats
A25Fault F36 occurred more than 3 times in the last 24 hours. With fault F36 the ionisation pin is short-circuited to earth, possibly due to moisture.View electrodes
A3Excessive flue gas temperature detected 3 times within 24 hours. This sensor is fitted as standardView sensors
A41No water circulation: after burner ignition, 3x no rise in CH flow temperature (at least 1°C rise required after 15 sec.).View electrodes
A5Fan errorView fans
CHeat demand for central heating / pump overrunView pumps
cHeat demand for central heating / pump overrunView pumps
E 04CH control sensor short-circuited, defective sensor, check the sensorView sensors
E 23Glow plug short-circuited to earthView electrodes
F08Gas valve fault.View gas valves
F09Flue gas temperature too high: the heat exchanger sensor measures an excessive flue gas temperature for more than 2 min.View heat exchangers
F10CH flow dual sensor fault (sensor 1): not connected or defectiveView sensors
F14Outdoor sensor faultView sensors
F16No ionisation signal after 1 minuteView electrodes
F36Ionisation pin short-circuited to earthView electrodes
F39Outdoor sensor faultView sensors
F47CH flow dual sensor fault (sensor 2): not connected or defectiveView sensors
F6Fan errorView fans

For guidance only: the same code can have a different cause depending on the model. Not sure? Write to us or have the appliance checked by a qualified professional.

Frequently asked questions

Which Agpo Ferroli spare parts does Instalpunt supply?

Instalpunt supplies 313 original parts for 94 Agpo Ferroli models, including Ferroli, Danfoss and Caleffi parts. Each part is listed in the catalogue with part number, price and stock status.

How do I find the right part for my Agpo Ferroli appliance?

Choose your model above to see the complete parts list. The model type is on the rating plate of the appliance. Already know the part number? Then search by number directly in the spare parts catalogue.

For which Agpo Ferroli models are parts available?

Among others for the MegaDens 4SHR, MegaDens 5, MegaDens 5SHR, MegaDens 4, MegaDens 3, Ultima 4S 1035C and 88 other models. Is your model not listed? Ask the manufacturer for the correct part number; with that number you can find it using the search function.

Are these original Agpo Ferroli parts?

Yes. They are original manufacturer parts for Agpo Ferroli appliances, with the official manufacturer part number. That way you can be sure the part fits and the warranty on your appliance is preserved.

How much do Agpo Ferroli spare parts cost?

Parts for Agpo Ferroli range from €1.31 to €1,545.94 incl. VAT. A frequently ordered part is the Ferroli ionisation electrode 27C for €32.67. The current price of each part is shown in the list.

Does a part from another Agpo Ferroli model also fit my appliance?

Only if the part number is the same. Agpo Ferroli often uses the same part in several models; if the same part number is listed for your model, it fits. If the number differs, order the part listed for your model. Not sure? Check with the manufacturer or your installer.

How quickly will I receive an Agpo Ferroli part?

Parts in stock: shipping to EU countries from €17.95 (€24.95 for more distant countries), usually 3–5 working days. For made-to-order items, the delivery time is shown on the product page.

Can I return an Agpo Ferroli part?

You have a 14-day right of withdrawal. Return unused parts, in their original packaging where possible; details are in our returns conditions.
Scroll to Top