Buderus fault code 2F260
Fault code 2F260 on a Buderus boiler (including GB162) means: The flow temperature sensor measures no temperature rise after a burner start. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 2F260 on a Buderus boiler indicates: The flow temperature sensor measures no temperature rise after a burner start.
Applies to
Buderus GB162, -.
Matching parts
Buderus parts are available from Instalpunt; shipping to EU countries from €17.95 (€24.95 for more distant countries), usually 3–5 working days.
For fault code 2F260, the part involved is usually in the category: burner.
To fix this fault you often need a replacement part. View the available Buderus parts:
Further reading on this cause
Other Buderus codes with the same cause
- 0Y 276 — The flow temperature sensor has measured a temperature higher than 95°C.
- 0Y 277 — The safety temperature sensor has measured a temperature higher than 95°C.
- 0Y 285 — The return temperature sensor has measured a temperature higher than 95°C.
- 1C210 — The flue gas sensor has measured too high a temperature and is open.
- 2F271 — The heating water temperature difference measured between the flow and safety temperature…
- 2L329 — The pressure sensor measures no water flow.
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Buderus boiler fault code 2F260 mean?
The flow temperature sensor measures no temperature rise after a burner start.
How do I fix fault code 2F260 on a Buderus boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Buderus fault code 2F260?
That depends on the exact cause. In the Buderus parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 2F260 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Buderus boiler faults and codes at a glance →