Ferroli fault code F13
Fault code F13 on a Ferroli boiler (including HR Econpact and HR Econpact 3) means: Flue gas sensor error. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code F13 on a Ferroli boiler indicates: Flue gas sensor error.
Applies to
Ferroli HR Econpact, HR Econpact 3, HR Econpact 3HP, HR Econpact 4, HR Econpact 4HP, HR Econpact 5, HR Econpact 50A, HR Econpact 50B, -, 125C, 127A (27A), 127C (27C), 135A (35A), 135C (35C), 225C, 235C.
Fault code F13 on other Ferroli series
The same code does not mean the same thing on every series. Check the rating plate to see which series you have:
- F13 on BlueSense 4, BlueSense 5, 12/22/32: Frequency error.
Matching parts
Ferroli parts are available from Instalpunt; shipping to EU countries from €17.95 (€24.95 for more distant countries), usually 3–5 working days.
Based on the cause, these original Ferroli parts fit (always check the type number of your appliance):
- Ferroli NTC sensor 27C click 22 mm 10kohm € 45.74
- Ferroli NTC sensor flue € 49.66
- Ferroli flow sensor angled € 120.23
Further reading on this cause
Other Ferroli codes with the same cause
- 8. — Flow domestic hot water sensor faulty
- A 07 — Sensor channel input faulty
- A 17 — Central heating sensor read error
- A 26 — Flue gas sensor measures a temperature above 90 C, or flue gas sensor 1000 Ohm resistor…
- A3 — Flue gas temperature too high Detected 3 times within 24 hours. This sensor is fitted as…
- A42 — Temperature difference too large between the 2 sensing elements of the central heating…
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Ferroli boiler fault code F13 mean?
Flue gas sensor error.
How do I fix fault code F13 on a Ferroli boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Ferroli fault code F13?
That depends on the exact cause. In the Ferroli parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code F13 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Ferroli boiler faults and codes at a glance →