EU delivery from € 12.95 Stock items ordered before 14:00, dispatched the same working day Delivery across the EU WebwinkelKeur 8,8/10 Pay by card, Apple Pay, Pay by Bank & Klarna
★★★★★8,8/1024 reviews · verified by WebwinkelKeurAll reviews →
Boiler with display and pressure gauge
Boiler fault codes

Itho Daalderop boiler faults: fault codes, causes and parts (page 2 of 2)

Codes 151 to 188 of the 188 fault codes for Itho Daalderop. Looking for a specific code? Use the search on the first page.

Itho Daalderop boiler fault codes 151 to 188 of 188

The code list is split over 2 pages. Looking for a specific code? Use the search on the first page: it searches all 188 codes in one go.

CodeCause
F2Boiler has been manually put into fault state
F4Ionisation fault
F5No ionisation during operation
F6Ionisation during standby
F7End of programming
F8Fan fault
F9VKK coupling fault
Geen codeFault with electrical power supply
Geen codeStatus / temperature display: no fan runs continuously
Geen codeStatus / temperature display: no fault with electrical power supply
Geen displayFuse faulty
HLockout message internal error
HLockout message internal error
HLockout message internal error
H 1Fault in coupling piece type VKK in the ventilation outlet duct
H 1Status / temperature display: fault in coupling piece type VKK in the ventilation outlet duct
H geenReset button sticks or is faulty, memory faulty
HHLockout message sensor open circuit/temperature > 118 C
HHLockout message sensor open circuit/temperature > 118°C
LLockout message reverse the mains plug
LLockout message reverse the mains plug
LBoiler plug inserted incorrectly
LLLockout message sensor short circuit/temperature < 10 oC
LLLockout message sensor short circuit/temperature < 10 oC
LLLockout message sensor short circuit/temperature < 10°C
LLLockout message sensor short circuit/temperature < 10 Oc
LetterInternal fault in control unit
W00Hot water temperature sensor value ‹ -10°C or › 118°C
W05Central heating pressure too low 0.5 bar Central heating water pressure too low, as a result of which the output is limited to the lowest output of the appliance. D
W10The system water pressure is 3.0 bar or higher, so the output is limited to the minimum output of the appliance.
W15Hot water temperature sensor value ‹ -10°C or › 118°C
W20The controller does not detect an outdoor sensor
_Lockout and fault messages Flashing display and permanently lit spanner symbol
cLockout message central heating water temperature sensor error
cSystem pressure error
tLockout message Appliance type recognition error
tLockout message appliance type recognition error
temp meldingTemporarily locked out

Itho Daalderop parts are available from Instalpunt. Back to the first page with the most searched codes and frequently asked questions.

Scroll to Top