Remeha fault code E 417
Fault code E 417 on a Remeha boiler (including Gas) means: Defect (open circuit or short circuit) of the hot water inlet temperature sensor. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E 417 on a Remeha boiler indicates: Defect (open circuit or short circuit) of the hot water inlet temperature sensor.
Applies to
Remeha Gas, 35 A HP.
Matching parts
Remeha parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Remeha-series: Tzerra Ace · Tzerra · Avanta Ace · Avanta · Calenta Ace · Calenta · Quinta Ace · Quinta.
For fault code E 417, the part involved is usually in the category: sensor.
Based on the cause, these original Remeha parts fit (always check the type number of your appliance):
- Remeha reed sensor magnet € 30.06
- Remeha TA temperature sensor € 64.03
- Remeha T mix temperature sensor € 81.02
Further reading on this cause
Other Remeha codes with the same cause
- 24 — Temperature sensor
- 31. — Flow temperature sensor fault
- 32. — Return temperature sensor fault
- 33. — Outdoor temperature sensor fault
- 34. — Temperature sensor fault
- 35 — Flue gas temperature sensor fault
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Remeha boiler fault code E 417 mean?
Defect (open circuit or short circuit) of the hot water inlet temperature sensor.
How do I fix fault code E 417 on a Remeha boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Remeha fault code E 417?
That depends on the exact cause. In the Remeha parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E 417 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Remeha boiler faults and codes at a glance →