ATAG fault code BL 60
Fault code BL 60 on an ATAG boiler (including 24/32Ci and 24C) means: Incorrect parameter setting of the minimum or maximum output. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code BL 60 on an ATAG boiler indicates: Incorrect parameter setting of the minimum or maximum output.
Applies to
ATAG 24/32Ci, 24C, 24Ci, 35Ci, 35S, Blauwe Engel, Blauwe Engel II, Enigma, 24/32Ci / FGO … autom: MCBA1415, 24C / FGO … autom: MCBA1415, 24Ci / FGO … autom: MCBA1415, 35Ci / FGO … autom: MCBA1415, 35S / FGO … autom: MCBA1415, CMA 350, CMA 352, CMA 650.
Matching parts
ATAG parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Atag-series: A Series · i Series (iCon) · Q Series · E Series · P-series (iCon) · Blauwe Engel · XL-series.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Atag pump gasket 3/4" DN20 R38x25x2 mm 2 pcs € 21.95
- Atag sealing cap exhaust pipe Ø13mm for flue gas measurement € 22.95
- Atag pump M.UPMO 20/60 130 9U 230V on/off € 352.95
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does ATAG boiler fault code BL 60 mean?
Incorrect parameter setting of the minimum or maximum output.
How do I fix fault code BL 60 on an ATAG boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for ATAG fault code BL 60?
That depends on the exact cause. In the ATAG parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code BL 60 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All ATAG boiler faults and codes at a glance →