Benraad fault code E 05
Fault code E 05 on a Benraad boiler (including BR 18 and BR 18T) means: Error 05: control unit fault. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E 05 on a Benraad boiler indicates: Error 05: control unit fault.
Applies to
Benraad BR 18, BR 18T, BR 24-32C, BR24C, BR24Ci, BR27, BR27T, BR35Ci, -.
Click a model for the parts list and exploded view of that appliance.
Matching parts
Benraad parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Atag pump gasket 3/4" DN20 R38x25x2 mm 2 pcs € 18.95
- Atag pump M.UPMO 20/60 130 9U 230V on/off € 480.90
- Atag sealing cap flue € 16.99
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Benraad boiler fault code E 05 mean?
Error 05: control unit fault.
How do I fix fault code E 05 on a Benraad boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Benraad fault code E 05?
That depends on the exact cause. In the Benraad parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E 05 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Benraad boiler faults and codes at a glance →