Remeha fault code 28
Fault code 28 on a Remeha boiler (including Gas and Quinta) means: Fan does not run. Fan is seized or rotor does not turn. No voltage or PWM signal due to corrosion of cable or connector. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 28 on a Remeha boiler indicates: Fan does not run. Fan is seized or rotor does not turn. No voltage or PWM signal due to corrosion of cable or connector.
Applies to
Remeha Gas, Quinta, W series, 115, 25c, 25s, 28c, 30c, 30s, 35c, 45, Selecta, Selecta Plus, W21c ECO, W21s ECO, W28c ECO, W28s ECO, W40 ECO (1:1), W40 ECO (1:9).
Click a model for the parts list and exploded view of that appliance.
Matching parts
Remeha parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Remeha-series: Tzerra Ace · Tzerra · Avanta Ace · Avanta · Calenta Ace · Calenta · Quinta Ace · Quinta.
For fault code 28, the part involved is usually in the category: fan.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Remeha venturi gasket 5 pcs for Quinta and Quinta Ace € 21.57
- Remeha grommet for flue pipe € 11.76
- Remeha gasket tape front plate 6mm for Quinta and Quinta Ace € 24.18
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Remeha boiler fault code 28 mean?
Fan does not run. Fan is seized or rotor does not turn. No voltage or PWM signal due to corrosion of cable or connector.
How do I fix fault code 28 on a Remeha boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Remeha fault code 28?
That depends on the exact cause. In the Remeha parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 28 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Remeha boiler faults and codes at a glance →