Itho Daalderop fault code P07
Fault code P07 on an Itho Daalderop heat pump (including HP-S) means: When the compressor has been stationary for a long time and the outdoor temperature is low, the compressor crankcase heater is switched on for some time to hot up the compressor before it starts. Reset the appliance once. If the code comes back, a part is usually faulty, often the compressor or inverter module.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code P07 on an Itho Daalderop heat pump indicates: When the compressor has been stationary for a long time and the outdoor temperature is low, the compressor crankcase heater is switched on for some time to hot up the compressor before it starts.
Applies to
Itho Daalderop HP-S, HP-S 130 lucht/water heat pump, indoor unit, HP-S 130 lucht/water heat pump, outdoor unit, HP-S 55 lucht/water heat pump, indoor unit, HP-S 55 lucht/water heat pump, outdoor unit, HP-S 95 lucht/water heat pump, indoor unit, HP-S 95 lucht/water heat pump, outdoor unit.
Matching parts
Itho Daalderop parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Based on the cause, these original Itho Daalderop parts fit (always check the type number of your appliance):
- Itho Daalderop compressor PCB for outdoor unit € 436.47
- Itho Daalderop compressor HP-S 05-00423 - € 835.05
- Itho Daalderop PCB compressor HP-S 55 € 369.82
Further reading on this cause
Other Itho Daalderop codes with the same cause
- A1 21 — The compressor temperature protection is not functioning properly or is defective.
- A1 24 — The compressor current consumption is too low.
- A1 26 — The compressor current consumption is too high.
- A1 37 — Compressor current consumption without control signal.
- E03 — There is a fault in the current supply to the compressor.
- E04 — There is a fault in the current supply to the compressor.
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Itho Daalderop heat pump fault code P07 mean?
When the compressor has been stationary for a long time and the outdoor temperature is low, the compressor crankcase heater is switched on for some time to hot up the compressor before it starts.
How do I fix fault code P07 on an Itho Daalderop heat pump?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Itho Daalderop fault code P07?
That depends on the exact cause. In the Itho Daalderop parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code P07 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Itho Daalderop heat pump faults and codes at a glance →