Intergas fault code 30
Fault code 30 on an Intergas boiler (including Kombi Kompakt and Kompakt Solo) means: Flame detection fault. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 30 on an Intergas boiler indicates: Flame detection fault.
Applies to
Intergas Kombi Kompakt, Kompakt Solo, HR 22, HR 28, HR 28/24, HR 36/30, HRE 12, HRE 18, HRE 24, HRE 24/18.
Fault code 30 on other Intergas series
The same code does not mean the same thing on every series. Check the rating plate to see which series you have:
- 30 on Kompakt Tap, Prestige, HR 22: Sensor error S3.
Matching parts
Intergas parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Intergas-series: Kombi Kompakt HRE · Kombi Kompakt HReco · Kombi Kompakt HR · Xtreme · Xtend · Prestige.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Intergas retaining spring NTC heat exchanger for Kombi Kompakt HRE and Kombi Kompakt HR etc. € 1.31
- Intergas burner gasket for Kombi Kompakt HRE and Kombi Kompakt HR etc. € 3.27
- Intergas air vent 3/8" € 4.24
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Intergas boiler fault code 30 mean?
Flame detection fault.
How do I fix fault code 30 on an Intergas boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Intergas fault code 30?
That depends on the exact cause. In the Intergas parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 30 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Intergas boiler faults and codes at a glance →