Inventum fault code Inverter alarm
Fault code Inverter alarm on an Inventum heat pump (including Ecolution) means: Power cable connector not connected properly, fault in inverter, fault in compressor. Reset the appliance once. If the code comes back, a part is usually faulty, often the compressor or inverter module. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code Inverter alarm on an Inventum heat pump indicates: Power cable connector not connected properly, fault in inverter, fault in compressor.
Applies to
Inventum Ecolution, Modul-AIR Blue, Modul-AIR Red.
Click a model for the parts list and exploded view of that appliance.
Matching parts
Inventum parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Based on the cause, these original Inventum parts fit (always check the type number of your appliance):
- Inventum compressor cable € 68.12
- Inventum inverter complete € 2,687.10
- Inventum cable inverter - fan € 83.58
Further reading on this cause
Other Inventum codes with the same cause
- 90 — Error code 80 repeated within 24 hours. Compressor locked out
- 94 — Compressor locked out (repeated error 81)
- AP4 (geen fault) — Pause mode, compressor may not be started
- F-03 — Compressor emergency operation
- F-81 — Internal compressor protection open, compressor overloaded
- F-94 — Air in the system, pump defective, condenser or compressor defective
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Inventum heat pump fault code Inverter alarm mean?
Power cable connector not connected properly, fault in inverter, fault in compressor.
How do I fix fault code Inverter alarm on an Inventum heat pump?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Inventum fault code Inverter alarm?
That depends on the exact cause. In the Inventum parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code Inverter alarm myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Inventum heat pump faults and codes at a glance →