EU delivery from € 12.95 Stock items ordered before 14:00, dispatched the same working day Delivery across the EU WebwinkelKeur 8,8/10 Pay by card, Apple Pay, Pay by Bank & Klarna
★★★★★8,8/1024 reviews · verified by WebwinkelKeurAll reviews →

A.O. Smith spare parts

Original parts for all A.O. Smith appliances. Choose your model below for the complete parts list (often with an exploded view) and order directly.

In brief

Instalpunt supplies 473 original A.O. Smith parts for 177 models, with part number, price and exploded view. Order online.

  • 473Spare parts
  • 177Models
  • €1.63From

A.O. Smith parts by type

Looking for a specific type of part? For each type, all A.O. Smith spare parts are listed with price, stock and the models they fit.

A.O. Smith hot water cylinders

A.O. Smith instantaneous water heaters

A.O. Smith heat pump water heaters

A.O. Smith fault code? This is the part you usually need

Your A.O. Smith appliance is showing a fault code? Below you can see, for common codes, which part is usually the cause – ready to order.

Fault codeWhat is going onPart
0A5The thermal fuse has interrupted the control circuit.View thermostats
045Damaged wiring and/or defective sensor.View sensors
78ABottom sensor faultView sensors
502Sensor fault: Sensor is not (correctly) connected.View sensors
503Sensor fault: damaged wiring and/or defective sensor.View sensors
504Sensor fault: damaged wiring and/or defective sensor.View sensors
787Top sensor faultView sensors
788Upper-middle sensor faultView sensors
789Lower-middle sensor faultView sensors
E03The two temperature sensors in the tank measure a difference of > 10 ºC for at least 60 seconds.View sensors
E04The two temperature sensors measure a difference of > 10 ºC for at least 60 seconds.View sensors
Explosive ignitionPoor flame pattern: insufficient air supplyView burners
F01Control fault: Live and neutral were swapped during connectionView electrodes
F02Fan fault: damaged or loose wiring.View fans
F02Defective motor and/or rotorView Motor
F03Air pressure switch fault: the non-return valve between the fan and the burner is stuck.View fans
F03Insufficient pressure difference at the air pressure switch, caused by: - the air supply and flue system - malfunctioning condensate drain - fouled burner - blocked heat exchangerView heat exchangers
F04Three unsuccessful ignition attempts: no burner pressureView burners
F04Three unsuccessful ignition attempts: fault in the glow igniter circuitView electrodes
F06Contact with a metal surface due to a broken cable or deformed ionisation pin.View electrodes
F07A flame was detected after the gas valve closed. Defective gas valves.View gas valves
F08Safety relay error. Flame detected before the gas valve opens.View gas valves
F08Ionisation fault: defective safety relayView electrodes
F10Limit on the number of ignition attempts based on switching of the flue damper relay. Flue damper relay switches during heat demand.View gas valves
F11Flame detected with gas valve closed. Defective gas valves.View gas valves
F13Flue damper is not driven by the motor. The motor does not open the flue damper.View gas valves
F14The micro-switch does not detect the position of the flue damper.View gas valves
S01Broken cable and/or defective sensor T2View sensors
S02Broken cableView sensors
S03Broken cable and/or defective sensorView sensors
X45-XXXX(Blocking fault) Sensor fault - short circuit of the temperature sensor: short circuit in the sensor circuit.View sensors
X46-XXXX(Blocking fault) Sensor fault - short circuit of temperature sensor: short circuit in the sensor circuit.View sensors
X47–XXXX(Blocking fault) Sensor fault - open circuit of temperature sensor: sensor is not (correctly) connected.View sensors
X48-XXXX(Blocking fault) Sensor fault - open circuit of temperature sensor: sensor is not (correctly) connected.View sensors
X57-XXXX(Lockout fault) Short circuit of the flame sensor: electrical connection between the flame sensor and the tank or burner.View burners
XAC-XXXX(Blocking fault) Air pressure switch fault - the switch is not closed when the fan runs during pre-purge: the hoses are damaged.View fans
XB2-XXXX(Lockout fault) Ignition fault - three failed ignition attempts: no gasView electrodes

For guidance only: the same code can have a different cause depending on the model. Not sure? Write to us or have the appliance checked by a qualified professional.

Frequently asked questions

Which A.O. Smith spare parts does Instalpunt supply?

Instalpunt supplies 473 original parts for 177 A.O. Smith models, including gasket, anode, drain valve, gas valve, fan. Each part is listed in the catalogue with part number, price and stock status.

How do I find the right part for my A.O. Smith appliance?

Choose your model above to see the complete parts list (for 165 models with an exploded view). The model type is on the rating plate of the appliance. Already know the part number? Then search by number directly in the spare parts catalogue.

For which A.O. Smith models are parts available?

Among others for the BFC 50N, BFC 100, BFC 30 (from 09-2009), ADMR 40, Instano ICW25, Instano ICW60 and 171 other models. Is your model not listed? Ask the manufacturer for the correct part number; with that number you can find it using the search function.

Are these original A.O. Smith parts?

Yes. They are original manufacturer parts for A.O. Smith appliances, with the official manufacturer part number. That way you can be sure the part fits and the warranty on your appliance is preserved.

How much do A.O. Smith spare parts cost?

Parts for A.O. Smith range from €1.63 to €3,537.51 incl. VAT. A frequently ordered part is the A.O. Smith clean-out service set / reinigingsopening for €36.59. The current price of each part is shown in the list.

Does a part from another A.O. Smith model also fit my appliance?

Only if the part number is the same. A.O. Smith often uses the same part in several models; if the same part number is listed for your model, it fits. If the number differs, order the part listed for your model. Not sure? Check with the manufacturer or your installer.

How quickly will I receive an A.O. Smith part?

Parts in stock: shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days. For made-to-order items, the delivery time is shown on the product page.

Can I return an A.O. Smith part?

As a consumer, within the 14-day withdrawal period. You may unpack and inspect, but not install or connect: for a part that has been installed, connected or damaged we deduct the diminished value, up to the full price for circuit boards and electronics. Check the part number beforehand.
Scroll to Top