Bosch fault code VA01810
Fault code VA01810 on a Bosch boiler (including Condens 7000F and Condens 7000FP) means: Hot water stays cold. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code VA01810 on a Bosch boiler indicates: Hot water stays cold.
Applies to
Bosch Condens 7000F, Condens 7000FP, 100 kW L / R, 150 kW L / R, 200 kW L / R, 300 kW L / R, 350 L / R, 400 L / R, 500 L / R, 75 L / R.
Matching parts
Bosch parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Bosch pressure gauge 2,5 bar 63mm AE D3/8"U € 7.84
- Nefit siphon gasket per 5 pcs for EcomLine and TopLine € 22.22
- Bosch sealing ring 10x13,5x1,5 CU gas valve 8718584813 € 31.36
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Bosch boiler fault code VA01810 mean?
Hot water stays cold.
How do I fix fault code VA01810 on a Bosch boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Bosch fault code VA01810?
That depends on the exact cause. In the Bosch parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code VA01810 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Bosch boiler faults and codes at a glance →