EU delivery from € 12.95 Stock items ordered before 14:00, dispatched the same working day Delivery across the EU WebwinkelKeur 9,0/10 Pay securely by card & Klarna
WhatsApp WhatsApp
Account
Log in Business login Create business account
Basket
★★★★★9,0/1023 reviews · verified by WebwinkelKeurAll reviews →
Cv-ketel met display en manometer
CV-ketel storingscodes

Remeha CV-ketel storing: codes, oorzaken en onderdelen (pagina 3 van 6)

Codes 301 tot 450 van de 806 storingscodes van Remeha. Zoek je een specifieke code, gebruik dan de zoeker op de eerste pagina.

Remeha cv-ketel storingscodes 301 tot 450 van 806

De codelijst is verdeeld over 6 pagina’s. Zoek je een specifieke code, gebruik dan de zoeker op de eerste pagina: die doorzoekt alle 806 codes in één keer.

CodeCause
E.04.08Safety input is open
E.04.08Maximum safe temperature value reached
E.04.08Safety input Safety input is open
E.04.09Temperature difference between the two flue gas temperature sensors is too large
E.04.09TFlue sensor Deviation between flue sensor 1 and flue sensor 2 detected
E.04.09Temperature difference between the two flue gas temperature sensors is too large
E.04.10Lockout due to a failed burner start
E.04.10Lockout due to a failed burner start. Five failed burner starts:
E.04.10Failed start: 5 failed burner starts detected
E.04.11Lockout due to a leaking gas valve
E.04.11VPS VPS gas valve check failed
E.04.11Lockout due to a leaking gas valve
E.04.12Lockout due to a false flame signal before burner start
E.04.12Ignition error before false flame detection
E.04.12Lockout due to a false flame signal before burner start
E.04.12False flame False flame detected before burner start
E.04.13Fan blade blocked or maximum rpm exceeded
E.04.13Fan speed exceeds normal operating range
E.04.13Fan Fan speed exceeds normal operating range
E.04.13Fan speed exceeds normal operating range
E.04.14The burner temperature and its set point differ for more than 60 seconds with regard to the GKR configuration.
E.04.14The burner temperature and its set point differ for more than 60 seconds with regard to the GKR configuration.
E.04.15The flue gas pipe is blocked
E.04.15Flue pipe blocked The flue gas pipe is blocked
E.04.17The gas valve actuator is defective
E.04.17Fault in the gas valve control circuit
E.04.17Gas valve actuator fault The gas valve actuator is defective
E.04.18The flow temperature is below the minimum temperature or the flow temperature sensor is not connected
E.04.18The flow temperature is lower than the minimum defined by the GKR parameter
E.04.18The flow temperature is lower than the minimum defined by the GKR parameter
E.04.21Deviation between burner sensor 1 and burner sensor 2 detected
E.04.23Internal lockout of gas valve control
E.04.23Internal stop communication
E.04.23Internal lockout of gas valve control
E.04.23Internal fault Internal lockout of gas valve control
E.04.24Gas type could not be identified
E.04.250Gas valve relay error detected
E.04.250Internal fault Gas valve relay error detected
E.04.250Gas valve relay error detected
E.04.254Unknown
E.04.254Fault in the gas valve control circuit
E.04.29Internal stop communication (maximum number of resets exceeded)
E.04.54Fault in the gas valve control circuit
E0Flow or return sensor fault
E00Parameter Storage Unit PSU not found
E00Parameter storage unit (PSU) not found
E00Parameter Storage Unit (PSU) not found
E00.00The flow temperature sensor has been removed or measures a temperature below the range
E00.01The flow temperature sensor is short-circuited or measures a temperature above the range
E00.04Return temperature sensor has been removed or measures a temperature below the range
E00.04Return temperature sensor not connected at boiler ignition (when the boiler is switched on, the control PCB detects whether the sensor is present and connected).
E00.05Return temperature sensor short-circuited
E00.05Return temperature sensor short-circuited.
E00.05The return temperature sensor is short-circuited or measures a temperature above the range
E00.06Return sensor not connected during boiler operation (the control PCB detects that the sensor is not connected during operation).
E00.07Return sensor temperature too high
E00.07Return sensor temperature too high.
E00.08Heat exchanger temperature sensor has been removed or measures a temperature below the range
E00.09Heat exchanger temperature sensor is short-circuited or measures a temperature above the range
E00.16DHW cylinder temperature sensor not connected.
E00.16DHW cylinder temperature sensor not connected
E00.17DHW cylinder temperature sensor short-circuited
E00.17DHW cylinder temperature sensor short-circuited.
E00.20The flue gas temperature sensor has been removed or measures a temperature below the range
E00.21The flue gas temperature sensor is short-circuited or measures a temperature above the range
E00.40Water pressure sensor has been removed or measures a pressure below the range
E00.40Water pressure sensor input open.
E00.40Water pressure sensor input open
E00.41Water pressure sensor input closed
E00.41Water pressure sensor input closed.
E00.41Water pressure sensor is short-circuited or measures a pressure above the range
E00.44DHW temperature sensor open.
E00.44DHW temperature sensor open
E00.45DHW temperature sensor short-circuited
E00.45DHW temperature sensor short-circuited.
E01Safety parameters not in order
E01Safety parameters not in order
E01Safety parameters not in order:
E01.045x error unintended loss of error occurred
E01.12Return temperature has a higher temperature value than the flow temperature
E01.12The temperature measured by the return sensor is higher than the flow temperature.
E01.12The temperature measured by the return sensor is higher than the flow temperature
E01.17The water does not flow through (permanent)
E01.17The water does not flow through (permanent).
E01.20Maximum flue gas temperature reached.
E01.20Maximum flue gas temperature reached
E02Flow temperature sensor short-circuited
E02Flow temperature sensor short-circuited:
E02.04Parameter error
E02.13Blocking input of the control unit from outside the appliance
E02.15External CSU time-out
E02.15Minimum time for recognition of CSU key exceeded.
E02.17Permanent communication fault in the PCB.
E02.17Permanent communication fault in the PCB
E02.17Gas valve control unit communication has exceeded feedback time
E02.32Time for automatic filling elapsed
E02.32Time for automatic filling elapsed.
E02.35Critical safety device disconnected
E02.35Critical safety device disconnected.
E02.35Critical safety device is disconnected
E02.39Pressure rise insufficient after automatic filling
E02.39Pressure rise insufficient after automatic filling.
E02.47Connection to external device failed
E02.47Connection to external device failed.
E02.47Connection of function groups failed
E03Flow temperature sensor open
E03Flow temperature sensor open:
E03Flow temperature sensor open
E04Flow temperature too low
E04Heat exchanger temperature too low
E04Heat exchanger temperature too low:
E04 E05Heat exchanger temperature too low Heat exchanger temperature too high
E04 E05Heat exchanger temperature too low - too high
E04.00Safety parameters level 5 are not correct or are missing
E04.00Error in safety settings
E04.00Error in safety settings.
E04.01Flow temperature sensor short-circuited
E04.01Flow temperature sensor is short-circuited or measures a temperature above the range
E04.01Flow temperature sensor short-circuited.
E04.02Flow temperature sensor has been removed or measures a temperature below the range
E04.02Flow temperature sensor not connected
E04.02Flow temperature sensor not connected.
E04.03Maximum flow temperature exceeded
E04.03Measured temperature above safety limit
E04.03Maximum flow temperature exceeded.
E04.04Flue gas sensor short-circuited
E04.04Flue gas sensor short-circuited.
E04.04Flue gas temperature sensor is short-circuited or measures a temperature above the range
E04.05Flue gas sensor not connected
E04.05Flue gas temperature sensor has been removed or measures a temperature below the range
E04.05Flue gas sensor not connected.
E04.06Critical flue gas temperature reached
E04.06Critical flue gas temperature reached.
E04.07Maximum difference between flow temperatures reached
E04.07Maximum difference between flow temperatures reached.
E04.07Deviation between flow sensor 1 and flow sensor 2 detected
E04.08Safety input is open
E04.09Deviation between flue sensor 1 and flue sensor 2 detected
E04.105 failed burner starts detected
E04.10Burner ignition failed after five attempts
E04.10Burner ignition failed after five attempts.
E04.11VPS gas valve test failed
E04.11VPS gas valve test failed.
E04.11VPS gas valve check failed
E04.12False flame detected before burner start
E04.12Ignition error before false flame detection
E04.12Ignition error before false flame detection.
E04.13Fan blade blocked
E04.13Fan blade blocked.
E04.13Fan speed exceeds normal operating range

Onderdelen voor Remeha koop je bij Instalpunt. Terug naar de eerste pagina met de meestgezochte codes en veelgestelde vragen.

Scroll to Top