ATAG fault code 914
Fault code 914 on an ATAG heat pump (including ENERGION ODM 11 and ENERGION ODM 11 T) means: TR sensor error. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 914 on an ATAG heat pump indicates: TR sensor error.
Applies to
ATAG ENERGION ODM 11, ENERGION ODM 11 T, ENERGION ODM 120 T, ENERGION ODM 150 T, ENERGION ODM 4, ENERGION ODM 40, ENERGION ODM 5, ENERGION ODM 50, 3069660, 3069661, 3069662, 3069663, 3069664, 3069665, 3069666, 3069667.
Click a model for the parts list and exploded view of that appliance.
Matching parts
ATAG parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Atag-series: A Series · i Series (iCon) · Q Series · E Series · P-series (iCon) · Blauwe Engel · XL-series.
For fault code 914, the part involved is usually in the category: sensor.
Based on the cause, these original ATAG parts fit (always check the type number of your appliance):
- Atag immersion sensor for e.g. Energion ODM 80 65155120 € 39.20
- Atag outdoor sensor with frost protection € 39.20
- Atag immersion sensor water inlet € 39.20
Further reading on this cause
Other ATAG codes with the same cause
- 1 — TD sensor error
- 114 — Outdoor sensor defective
- 730 — Buffer top sensor defective
- 732 — Storage tank bottom sensor defective
- 902 — Flow sensor damaged
- 913 — LWT sensor error
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does ATAG heat pump fault code 914 mean?
TR sensor error.
How do I fix fault code 914 on an ATAG heat pump?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for ATAG fault code 914?
That depends on the exact cause. In the ATAG parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 914 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All ATAG heat pump faults and codes at a glance →