Atlantic fault code 63
Fault code 63 on an Atlantic heat pump (including ODU Monoblock Atlantic 11 and ODU Monoblock Atlantic 6) means: Inverter fault. Reset the appliance once. If the code comes back, a part is usually faulty, often the compressor or inverter module. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 63 on an Atlantic heat pump indicates: Inverter fault.
Applies to
Atlantic ODU Monoblock Atlantic 11, ODU Monoblock Atlantic 6, ODU Monoblock Atlantic 8, 750732, 750733.
Matching parts
Atlantic parts are available from Instalpunt; shipping to EU countries from €17.95 (€24.95 for more distant countries), usually 3–5 working days.
Based on the cause, these original Atlantic parts fit (always check the type number of your appliance):
- Atlantic compressor € 1,740.95
- Atlantic compressor sensor € 41.95
- Atlantic compressor 100klt € 2,078.95
Further reading on this cause
Other Atlantic codes with the same cause
- 72 — Compressor temperature sensor fault
- 84 — Compressor current fault
- 95 — Compressor rotor position detection fault, compressor start fault
- A2 — Overcurrent protection action. DC current detection: Compressor.
- A3 — Compressor temperature protection
- A5 — Abnormal compressor rotation: Abnormal operation due to too low or too high load.
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Atlantic heat pump fault code 63 mean?
Inverter fault.
How do I fix fault code 63 on an Atlantic heat pump?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Atlantic fault code 63?
That depends on the exact cause. In the Atlantic parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 63 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Atlantic heat pump faults and codes at a glance →