Agpo Ferroli Optifor spare parts
In brief
Instalpunt supplies 10 original parts for the Agpo Ferroli Optifor, including sensors, heat exchangers, diverter valves and hydroblocks. Order online.
- 10Spare parts
- 4In stock
- €26.20From
- 6Types
Looking for parts for the Agpo Ferroli Optifor (MVHR unit)? Below are all 10 original parts, grouped by part type. Choose a type to jump straight to the right table.
- Sensors 1
- Heat exchangers 1
- Diverter valves and hydroblocks 2
- Siphons and condensate drains 1
- Filters 3
- Valves 1
- Other parts 1
Sensors for the Agpo Ferroli Optifor (1) all Agpo Ferroli sensors →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli frost protection sensor | 8117025 Mfr. no. 3211007 | €72.95 | In stock | View & order |
Heat exchangers for the Agpo Ferroli Optifor (1) all Agpo Ferroli heat exchangers →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli HR cross heat exchanger Optifor 3211045 | 8117209 Mfr. no. 3211045 | €741.95 | Made-to-order item | View & order |
Diverter valves and hydroblocks for the Agpo Ferroli Optifor (2) all Agpo Ferroli diverter valves and hydroblocks →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli bypass sensor left | 8117001 Mfr. no. 3211006 | €87.95 | Made-to-order item | View & order |
| Ferroli bypass sensor right | 8117002 Mfr. no. 3211008 | €87.95 | Made-to-order item | View & order |
Siphons and condensate drains for the Agpo Ferroli Optifor (1) all Agpo Ferroli siphons and condensate drains →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli condensate drain set Optifort with Econpact/Megadens | 8117420 Mfr. no. 2410160 | €167.95 | In stock | View & order |
Filters for the Agpo Ferroli Optifor (3) all Agpo Ferroli filters →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Comfort Line filter set Coarse (G3) for Ferroli Optifor after week 43-2001 (2 pcs) | 8804001 | €26.95 | In stock | View & order |
| Ferroli filter set 2 pcs after week 43/2001 | 8117005 Mfr. no. 3211020 | €51.95 | Made-to-order item | View & order |
| Comfort Line filter set Coarse (G3) for Ferroli Optifor before week 43-2001 (2 pcs) | 8804011 | €42.95 | Made-to-order item | View & order |
Valves for the Agpo Ferroli Optifor (1) all Agpo Ferroli valves →
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli air non-return valve Optifor T | 8117003 Mfr. no. 3211009 | €137.95 | In stock | View & order |
Other parts for the Agpo Ferroli Optifor (1)
| Part | Item no. / mfr. no. | Price | Stock | |
|---|---|---|---|---|
| Ferroli PCB revision optifor ot/v/350 3212002 | 8112022 Mfr. no. 3212002 | €288.95 | Made-to-order item | View & order |
Fault code on your Agpo Ferroli Optifor? This is the part type involved
Common Agpo Ferroli fault codes and the part type that is usually the cause; the parts for this model are listed above.
| Code | What is going on | Part type |
|---|---|---|
| 5 | Insufficient combustion air or condensate drain blocked. | Siphons and condensate drains |
| A 3 | Excessive flue gas temperature detected 3 times within 24 hours. This sensor is fitted as standard | Sensors |
| A3 | Excessive flue gas temperature detected 3 times within 24 hours. This sensor is fitted as standard | Sensors |
| E 04 | CH control sensor short-circuited, defective sensor, check the sensor | Sensors |
| F09 | Flue gas temperature too high: the heat exchanger sensor measures an excessive flue gas temperature for more than 2 min. | Heat exchangers |
| F10 | CH flow dual sensor fault (sensor 1): not connected or defective | Sensors |
For guidance only: the same code can have a different cause depending on the situation.
Other Agpo Ferroli MVHR units
Frequently asked questions
Which parts are available for the Agpo Ferroli Optifor?
The catalogue lists 10 original parts for the Agpo Ferroli Optifor, including sensors, heat exchangers, diverter valves and hydroblocks, siphons and condensate drains. All parts are listed above, grouped by type, with part number and price.
How much does a sensor for the Agpo Ferroli Optifor cost?
The sensors for this model cost €78.41 incl. VAT. Check the table "Sensors" above for the right part number.
Are the parts for the Agpo Ferroli Optifor in stock?
4 of the 10 parts are in stock; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days. Parts marked "Made-to-order item" are ordered specially for you; the delivery time is shown on the product page.
How do I know which part I need for the Agpo Ferroli Optifor?
Search for the part by part number or use the parts list of the Agpo Ferroli Optifor. Is your appliance showing a fault code? The fault code table shows the matching part type.
Are these original Agpo Ferroli parts?
Yes. All 10 parts in this list are original manufacturer parts for the Agpo Ferroli Optifor, supplied through the official technical wholesale channel and with the correct part number.
How much do parts for the Agpo Ferroli Optifor cost?
Parts for the Agpo Ferroli Optifor range from €26.20 to €960.50 incl. VAT. The exact price of each part is shown in the tables above.
Can I return a part?
As a consumer you have a 14-day right of withdrawal. You may unpack and inspect the part; do not install or connect it. For a part that has been installed, connected or damaged we deduct the diminished value, up to the full price for circuit boards.