Brink Climate Systems fault code 10, 11, 12, 13, 14
Fault code 10, 11, 12, 13, 14 on a Brink Climate Systems boiler (including Kombi Kompakt) means: Sensor fault S1. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code 10, 11, 12, 13, 14 on a Brink Climate Systems boiler indicates: Sensor fault S1.
Fixing fault code 10, 11, 12, 13, 14: step by step
- Reset the appliance once; a one-off measuring error will then clear.
- Where you can reach it without opening the sealed combustion section, check that the sensor plug is seated firmly and the wiring is undamaged.
- If the code comes back, the sensor or its wiring is usually faulty (short or open circuit). Sensors in the sealed combustion section should be replaced by a qualified heating engineer.
Applies to
Brink Climate Systems Kombi Kompakt, HRE 24/18, HRE 28/24, HRE 36/30, HREco 36.
Matching parts
Brink Climate Systems parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
To fix this fault you often need a replacement part. View the available Brink Climate Systems parts:
All Brink Climate Systems parts →
Further reading on this cause
Other Brink Climate Systems codes with the same cause
- 0 — Sensor fault after self-check
- 20, 21, 22, 23, 24 — Sensor fault S2
- 27 — Short circuit of outdoor sensor
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Brink Climate Systems boiler fault code 10, 11, 12, 13, 14 mean?
Sensor fault S1.
How do I fix fault code 10, 11, 12, 13, 14 on a Brink Climate Systems boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Brink Climate Systems fault code 10, 11, 12, 13, 14?
That depends on the exact cause. In the Brink Climate Systems parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code 10, 11, 12, 13, 14 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Brink Climate Systems boiler faults and codes at a glance →