Spare parts — usually 3–7 working days EU delivery from € 9.95 · free from € 199 In stock: delivered in 3–5 working days Delivery across the EU WebwinkelKeur 8,8/10 Pay by card, Apple Pay, Pay by Bank, PayPal & Klarna
★★★★★8,8/1024 reviews · verified by WebwinkelKeurAll reviews →

Nefit (Bosch) spare parts

Original parts for all Nefit (Bosch) appliances. Choose your model below for the complete parts list (often with an exploded view) and order directly.

Find your Nefit part

Choose your appliance step by step

Or search directly

By part number, appliance type or name
Popular brands

Loading catalogue…

In brief

Instalpunt supplies 2,192 original Nefit (Bosch) parts for 183 models, with part number, price and exploded view. Order online.

  • 2.192Spare parts
  • 183Models
  • €1.41From

Populaire Nefit-series

Looking for a wear part for a common appliance? These pages show, per series, the most frequently replaced parts (fan, pump, electrode, diverter valve, sensors) and all the models in that series.

Nefit (Bosch) parts by appliance family

Nefit (Bosch) parts by type

Looking for a specific type of part? For each type, all Nefit (Bosch) spare parts are listed with price, stock and the models they fit.

Nefit (Bosch) hot water cylinders

Nefit (Bosch) boilers

Nefit (Bosch) heat pumps

Original Nefit-parts herkennen and bestellen

Een origineel Nefit-part is the part that Nefit itself supplies for the appliance, with the manufacturer part number of Nefit. For Nefit, that is 10 digits, usually starting with 87 of 7736 (for example 8738901298). That number is on the old part, in the exploded view of your model and on every Instalpunt product page (also in the title), so you can compare them one to one.

Please note: we do not check whether a part fits your appliance. Compare the manufacturer number with the number on your old part or in the exploded view of your model; if in doubt, check with Nefit or your installer.

Nefit (Bosch) fault code? This is the part you usually need

Your Nefit (Bosch) appliance is showing a fault code? Below you can see, for common codes, which part is usually the cause – ready to order.

Fault codeWhat is going onPart
0C 283The boiler is preparing for a burner start. The fan and pump are activated.View fans
0L 284The gas valve is activated.View electrodes
0L 284The gas control valve is activated.View gas valves
0Y 276The flow temperature sensor has measured a temperature higher than 95°C.View sensors
0Y 277The safety temperature sensor has measured a temperature higher than 95°C.View sensors
0Y 285The return temperature sensor has measured a temperature higher than 95°C.View sensors
1A 316The flue gas temperature sensor has measured an excessive temperature.View sensors
1CFlue gas thermostat connection is openView thermostats
1P 346The temperature of the flue gas temperature sensor is rising too fast.View sensors
1U 317The contacts of the flue gas temperature sensor are short-circuited.View sensors
1Y 318The contacts of the flue gas temperature sensor are open circuit.View sensors
2 213The temperature measured by the flow temperature sensor or the return temperature sensor is rising too fast.View sensors
2A 343During CH operation: the flue gas temperature sensor measures a temperature rise, but the flow temperature sensor does not.View sensors
2CHeat exchanger safety sensor too hot. The pump is defective. The water level in the CH circuit is too low due to leakage or air in the installationView pumps
2CHeat exchanger safety sensor too hotView heat exchangers
2FTemperature difference between the safety and flow sensor is too large. The flow and return sensors are swapped. There is too much resistance in the CH circuit, e.g. closed radiator valves. The bypass is incorrectly installed or set. The pump is stuck.View pumps
2F 260The flow temperature sensor measures no temperature rise after a burner start.View burners
2F 271The measured temperature difference between the flow and safety temperature sensors is too largeView sensors
2F 345The flow temperature sensor measures no temperature rise after a burner start.View burners
2F 578During the sensor test an excessive temperature difference was measured between the flow and return temperature sensors.View sensors
2L 266The pressure sensor has measured insufficient CH-side flow. This check is repeated every 5 minutes.View sensors
2L 329The pressure sensor measures no water flowView sensors
2P 212The temperature measured by the flow temperature sensor or the safety temperature sensor is rising too fast.View sensors
2P 341The temperature measured by the flow temperature sensor or the return temperature sensor is rising too fast.View sensors
2P 342The temperature measured by the flow temperature sensor is rising too fast.View sensors
2U 213The measured temperature difference between the flow and return temperature sensors is too large.View sensors
2U 349The temperature difference measured at low load between the flow and return temperature sensors is too large.View sensors
2Y 281Water pressure fault: the pump is stuck or running dry (air).View pumps
2Y 282The pump control signal is missing.View pumps
3A 264Fan tacho signal fault. The fan tacho signal was lost during the operating phase.View fans
3C 217The fan speed is irregular during start-up.View fans
3L 214Fan not running during the start-up phase.View fans
3P 216The fan runs too slowly.View fans
3Y 215The fan runs too fast.View fans
4 222The contacts of the flow temperature sensor are short-circuited.View sensors
4A 218The flow temperature sensor has measured a temperature higher than 105 °C.View sensors
4A 332The flow temperature sensor has measured a temperature higher than 105 °C.View sensors
4CFuse F2 is defective. Burner thermostat has become too hot. The flow temperature is too high. Too many radiators closed: open more radiators. Bypass is fitted too close to the boiler: fit the bypass at least 6 metres from the boiler.View burners
4C 224Heat exchanger high-limit thermostat or flue gas high-limit thermostat has tripped.View heat exchangers
4C 224The safety temperature sensor has measured an excessive temperature and is open.View sensors

For guidance only: the same code can have a different cause depending on the model. Not sure? Write to us or have the appliance checked by a qualified professional.

Frequently asked questions

Which Nefit (Bosch) spare parts does Instalpunt supply?

Instalpunt supplies 2,192 original parts for 183 Nefit (Bosch) models, including nefit, bosch, rewind, buderus, pressol. Each part is listed in the catalogue with part number, price and stock status.

How do I find the right part for my Nefit (Bosch) appliance?

Choose your model above to see the complete parts list (for 182 models with an exploded view). The model type is on the rating plate of the appliance. Already know the part number? Then search by number directly in the spare parts catalogue.

For which Nefit (Bosch) models are parts available?

Among others for the 9000i AquaPower Plus HRC30 CW6, 9000i AquaPower Plus HRC45 CW6, TrendLine II HRC25 CW6 II, TrendLine II HRC30 CW6 II, 9700i AquaPower Plus HRC30 CW6, 9700i AquaPower Plus HRC45 CW6 and 177 other models. Is your model not listed? Ask the manufacturer for the correct part number; with that number you can find it using the search function.

Are these original Nefit (Bosch) parts?

Yes. They are original manufacturer parts for Nefit (Bosch) appliances, with the official manufacturer part number. That way you can be sure the part fits and the warranty on your appliance is preserved.

How much do Nefit (Bosch) spare parts cost?

Parts for Nefit (Bosch) range from €1.41 to €5,030.03 incl. VAT. A frequently ordered part is the Nefit gasket siphon per 5 pcs for €23.99. The current price of each part is shown in the list.

Does a part from another Nefit (Bosch) model also fit my appliance?

Only if the part number is the same. Nefit (Bosch) often uses the same part in several models; if the same part number is listed for your model, it fits. If the number differs, order the part listed for your model. Not sure? Check with the manufacturer or your installer.

How quickly will I receive a Nefit (Bosch) part?

Parts in stock: shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days. For made-to-order items, the delivery time is shown on the product page.

Can I return a Nefit (Bosch) part?

As a consumer, within the 14-day withdrawal period. You may unpack and inspect, but not install or connect: for a part that has been installed, connected or damaged we deduct the diminished value, up to the full price for circuit boards and electronics. Check the part number beforehand.
Scroll to Top