Itho Daalderop fault code E14
Fault code E14 on an Itho Daalderop boiler (including Base Cube) means: The hot water temperature does not rise after 3 attempts. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E14 on an Itho Daalderop boiler indicates: The hot water temperature does not rise after 3 attempts.
Fixing fault code E14: step by step
- Reset the appliance once; a one-off measuring error will then clear.
- Where you can reach it without opening the sealed combustion section, check that the sensor plug is seated firmly and the wiring is undamaged.
- If the code comes back, the sensor or its wiring is usually faulty (short or open circuit). Sensors in the sealed combustion section should be replaced by a qualified heating engineer.
Applies to
Itho Daalderop Base Cube, 24/30 (13L) cw 4, 24/35 (16L) cw 5, 30/35 (16L) cw 5, Duo, After 2016, Tot 2016.
Matching parts
Itho Daalderop parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
Itho Daalderop service set gasket mixing chamber € 27.53
Itho Daalderop sight glass for burner unit € 33.87
Itho Daalderop service set test cap 5 pcs flue pipe sealing cap € 36.69
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Itho Daalderop boiler fault code E14 mean?
The hot water temperature does not rise after 3 attempts.
How do I fix fault code E14 on an Itho Daalderop boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Itho Daalderop fault code E14?
That depends on the exact cause. In the Itho Daalderop parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E14 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Itho Daalderop boiler faults and codes at a glance →