Radson fault code E2
Fault code E2 on a Radson boiler (including Maxicom) means: Flow NTC (1) defective. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E2 on a Radson boiler indicates: Flow NTC (1) defective.
Fixing fault code E2: step by step
- Reset the appliance once; a one-off measuring error will then clear.
- Where you can reach it without opening the sealed combustion section, check that the sensor plug is seated firmly and the wiring is undamaged.
- If the code comes back, the sensor or its wiring is usually faulty (short or open circuit). Sensors in the sealed combustion section should be replaced by a qualified heating engineer.
Applies to
Radson Maxicom, NL / E.
Click a model for the parts list and exploded view of that appliance.
Fault code E2 on other Radson series
The same code does not mean the same thing on every series. Check the rating plate to see which series you have:
- E2 on Radostar, EHLE 17, EHLE 23, EHLE 27, EHLE 34, EHLE 39: Flow sensor fault.
Matching parts
Radson parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Based on the cause, these original Radson parts fit (always check the type number of your appliance):
- Bosch NTC flow + O-ring € 96.49
Further reading on this cause
Other Radson codes with the same cause
- 7 — NTC 1 or 2 open circuit or short circuit
- 8 — NTC 2 open circuit or short circuit
- A6 — Flue gas NTC (4)
- A7 — Return NTC (2) defective
- Ad — Domestic hot water sensor fault.
- CC — Outdoor sensor defective
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Radson boiler fault code E2 mean?
Flow NTC (1) defective.
How do I fix fault code E2 on a Radson boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Radson fault code E2?
That depends on the exact cause. In the Radson parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E2 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Radson boiler faults and codes at a glance →