Remeha fault code H06.06
Fault code H06.06 on a Remeha heat pump (including Eria Tower Ace R32 and Eria Tower Ace S R32) means: BL compressor high pressure:. Reset the appliance once. If the code comes back, a part is usually faulty, often the compressor or inverter module. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code H06.06 on a Remeha heat pump indicates: BL compressor high pressure:.
Fixing fault code H06.06: step by step
- Check that the outdoor unit is clear (no leaves, snow or ice) and that its circuit breaker is on.
- Switch the appliance off at the mains for a few minutes and restart it.
- If the code comes back, the problem is the compressor or inverter module. Only an F-gas certified engineer may work on the refrigerant circuit.
Applies to
Remeha Eria Tower Ace R32, Eria Tower Ace S R32, Mercuria Ace R32, -.
Matching parts
Remeha parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Remeha-series: Tzerra Ace · Tzerra · Avanta Ace · Avanta · Calenta Ace · Calenta · Quinta Ace · Quinta.
Based on the cause, these original Remeha parts fit (always check the type number of your appliance):
- Remeha compressor 2kW € 603.15
- Remeha compressor 3kW € 636.43
- Remeha compressor 5kW € 821.55
Further reading on this cause
Other Remeha codes with the same cause
- H06.07 — BL compressor low pressure:
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Remeha heat pump fault code H06.06 mean?
BL compressor high pressure:.
How do I fix fault code H06.06 on a Remeha heat pump?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Remeha fault code H06.06?
That depends on the exact cause. In the Remeha parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code H06.06 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Remeha heat pump faults and codes at a glance →