Remeha fault code E.00.44
Fault code E.00.44 on a Remeha boiler (including Quinta Ace) means: TcombiDHWOutOpen Domestic hot water outlet temperature sensor has been removed or measures a temperature below the range. Reset the appliance once. If the code comes back, a part is usually faulty, often a temperature sensor. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E.00.44 on a Remeha boiler indicates: TcombiDHWOutOpen Domestic hot water outlet temperature sensor has been removed or measures a temperature below the range.
Fixing fault code E.00.44: step by step
- Reset the appliance once; a one-off measuring error will then clear.
- Where you can reach it without opening the sealed combustion section, check that the sensor plug is seated firmly and the wiring is undamaged.
- If the code comes back, the sensor or its wiring is usually faulty (short or open circuit). Sensors in the sealed combustion section should be replaced by a qualified heating engineer.
Applies to
Remeha Quinta Ace, 115, 160, 45, 65, 90.
Click a model for the parts list and exploded view of that appliance.
Fault code E.00.44 on other Remeha series
The same code does not mean the same thing on every series. Check the rating plate to see which series you have:
- E.00.44 on Calenta Ace, 25DS Double Solo, 28C Combi CW4, 35DS Double Solo, 40C Combi CW5, 40L Combi CW6: Domestic hot water outlet temperature sensor has been removed or measures a temperature below the range.
- E00.44 on Tzerra Ace-Matic, 24C CW3, 28C CW4, 35C CW5, Calenta Ace-Matic, 30C CW4: DHW temperature sensor open.
Matching parts
Remeha parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Remeha-series: Tzerra Ace · Tzerra · Avanta Ace · Avanta · Calenta Ace · Calenta · Quinta Ace · Quinta.
Based on the cause, these original Remeha parts fit (always check the type number of your appliance):
- Remeha sensor set 10k NTC 2x and double 10k NTC for Quinta Ace and Calenta Ace etc. € 36.69
- Remeha water pressure sensor € 57.08
- Remeha flue gas sensor NTC 2x 20k for Quinta Ace € 29.90
Further reading on this cause
Other Remeha codes with the same cause
- 24 — Temperature sensor
- 31. — Flow temperature sensor fault
- 32. — Return temperature sensor fault
- 33. — Outdoor temperature sensor fault
- 34. — Temperature sensor fault
- 35 — Flue gas temperature sensor fault
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Remeha boiler fault code E.00.44 mean?
TcombiDHWOutOpen Domestic hot water outlet temperature sensor has been removed or measures a temperature below the range.
How do I fix fault code E.00.44 on a Remeha boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Remeha fault code E.00.44?
That depends on the exact cause. In the Remeha parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E.00.44 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Remeha boiler faults and codes at a glance →