Remeha fault code E14
Fault code E14 on a Remeha boiler (including Calenta and Calora) means: 5 failed burner starts. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E14 on a Remeha boiler indicates: 5 failed burner starts.
Fixing fault code E14: step by step
- Check that the gas valve at the appliance is open and that other gas appliances, such as the hob, are getting gas.
- Check that the condensate trap under the appliance is filled and clean; a blocked condensate drain can make the boiler lock out.
- Check outside that the air intake and flue are clear (leaves, a nest, ice or snow).
- Reset the appliance once. If the code comes straight back, do not keep resetting it.
- If the fault keeps returning, the ignition or ionisation electrode is usually worn or dirty. It sits in the sealed combustion section: have it replaced by a qualified heating engineer.
Applies to
Remeha Calenta, Calora, Quinta, 115 PRO, 25S Solo, 28C Combi CW4, 90 PRO, Calora Tower Gas 35S NL, 40C Combi CW5, 40L Combi CW6, Gas, Tzerra, 610 connection set with plate heat exchanger, 610 connection set low-loss header, Plus M 24C Combi CW3, Plus M 28C Combi CW4, Plus M 39C Combi CW5, Pro 45 Solo, Pro 65 Solo, Calora Tower, 210 V2 80/120/160/200 kW, 220 SHL.
Fault code E14 on other Remeha series
The same code does not mean the same thing on every series. Check the rating plate to see which series you have:
- E14 on Gas, Tzerra, 39 kW Combi, Gas 210 Eco Pro 115, Gas 210 Eco Pro 80, M 24c CW3: 5 failed burner starts, no ignition spark.
- E14 on Calenta, Tzerra, 25L CW6, 35S, M 24c CW3: 5 failed burner starts, ignition spark present but no flame formation.
- E14 on Tzerra, M 24c CW3, M 28c CW4: Flame present but no or insufficient ionisation:.
- E14 on Calenta, 25L CW6, 35S: 5 failed burner starts, flame present but no or insufficient ionisation (<3µA).
- E14 on Tzerra, M 28c CW4: Ignition spark present but no flame formation.
Matching parts
Remeha parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
Parts per Remeha-series: Tzerra Ace · Tzerra · Avanta Ace · Avanta · Calenta Ace · Calenta · Quinta Ace · Quinta.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Remeha flue test point protective cap 5 pcs for e.g. Quinta Ace 65 S62233 € 26.51
- Remeha flue test point protective cap 5 pcs for e.g. Quinta Ace 65 S62232 € 31.26
- Remeha venturi gasket 5 pcs for Quinta and Quinta Ace € 22.43
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Remeha boiler fault code E14 mean?
5 failed burner starts.
How do I fix fault code E14 on a Remeha boiler?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Remeha fault code E14?
That depends on the exact cause. In the Remeha parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E14 myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Remeha boiler faults and codes at a glance →