Brink Climate Systems fault code E152* (Subcode E1001)
Fault code E152* (Subcode E1001) on an Brink Climate Systems MVHR unit (including Flair) means: Flash memory defective. Reset the appliance once. If the code comes back, a part is usually faulty. You can check the water pressure and settings yourself; leave work on gas-carrying parts to a certified gas engineer.
After a safety alert (gas, flue gas, combustion), reset no more than once and call in a certified gas engineer. If you smell gas, call your national gas emergency number or 112 immediately.
Cause
Fault code E152* (Subcode E1001) on an Brink Climate Systems MVHR unit indicates: Flash memory defective.
Fixing fault code E152* (Subcode E1001): step by step
- Note the exact code and the type of your appliance (see the rating plate).
- Check that the appliance has power and that its circuit breaker is on.
- Reset the appliance once. If the code comes straight back, do not keep resetting it.
- If the code comes back, choose the matching part below or have a qualified heating engineer take a look.
Applies to
Brink Climate Systems Flair, 300, 400.
Matching parts
Brink Climate Systems parts are available from Instalpunt; shipping to EU countries from €12.95 (€16.95 for more distant countries), usually 3–5 working days.
This message does not point directly to one faulty part. These are the parts that most often fit this appliance:
- Brink silicone gasket Flair B46 IGB € 4.41
- Brink filter set Flair 300/400 € 46.21
- Brink temperature sensor € 53.00
All Brink Climate Systems parts →
Fix it yourself or call an engineer?
Always consult the manual for your appliance and work safely. If in doubt or if the fault comes back, call in a qualified professional. A question about a part? Write to us at info@instalpunt.nl.
Frequently asked questions
What does Brink Climate Systems MVHR unit fault code E152* (Subcode E1001) mean?
Flash memory defective.
How do I fix fault code E152* (Subcode E1001) on an Brink Climate Systems MVHR unit?
First check the cause described above. Then restart the appliance using the reset button. If the message comes back, a part usually needs replacing or the fault needs to be repaired by a qualified professional.
Which parts do I need for Brink Climate Systems fault code E152* (Subcode E1001)?
That depends on the exact cause. In the Brink Climate Systems parts overview at Instalpunt you will find the current price and stock for each part.
Can I fix fault code E152* (Subcode E1001) myself?
You can reset the appliance and check things like the water pressure or settings yourself. Work on gas-carrying parts must be left to a certified gas engineer.
All Brink Climate Systems MVHR unit faults and codes at a glance →