Caldo Trendy ceramic fan heater, 1,800 W
At a glance
Weighing 1.7 kg and standing 284 mm high, the Caldo Trendy is a small fan heater built around a ceramic heating element. The product sheet gives a heatable volume of up to 55 m³, and the manufacturer intends it for the smallest rooms in a home. With its IP21 rating the manufacturer also lists the bathroom as a place to use it.
How you use it
Everything is set on the digital panel on the heater itself, and an LED display shows your setting. You choose between two outputs, 900 W and 1,800 W, and a room temperature between 15 °C and 30 °C. An ECO function is available, which the manufacturer says can save up to 50% energy. The timer runs for up to 12 hours. When you switch on the oscillation, the heater turns through 80 degrees by itself and spreads the warmth more widely. For safety there is a safety thermostat, overheating protection and a switch that cuts the power if the heater falls over. The appliance has insulation class II and runs on a mains supply of 220 to 240 V.
Specifications
| Product code | 99268 |
|---|---|
| Maximum output | 1,800 W |
| Power settings | 900 / 1,800 W |
| Heatable volume | Maximum 55 m³ |
| Temperature setting | 15 °C to 30 °C |
| Timer | 12 hours |
| Oscillation angle | 80 degrees |
| Protection rating | IP21 |
| Insulation class | II |
| Power supply | 220/240 V, single phase, 50 Hz |
| Dimensions (w x h x d) | 216 x 284 x 125 mm |
| Weight | 1.7 kg |
Before you buy
- No remote control comes with this model. You operate it on the heater.
- According to the product sheet there is no fan setting without heat.
- IP21 means protection against vertically falling drops. It does not cover splashing water or water jets.
Manual and documents
The manufacturer's manual and product sheet are on our specialist site olimpia-air.com (site in Dutch): documents for the Caldo Trendy.
Reviews
There are no reviews yet.