Caldo Trendy T ceramic tower fan heater with dust filter
At a glance
The T is the tower in the three-model Caldo Trendy line: 604 mm tall, on an oscillating base, with a dust filter in the air inlet. The manufacturer has the larger rooms of a home in mind, up to a volume of 60 m³. Heat comes from a ceramic element with two settings, 1,000 W and 2,000 W.
How you use it
You can place the tower in a corner and still reach the rest of the room, because the base sweeps through 80 degrees automatically. Settings are made on the digital panel with LED display or with the remote control that is supplied. The room thermostat covers 15 °C to 30 °C and the timer goes up to 12 hours. The ECO function is stated by the manufacturer to save up to 50% energy. The dust filter is easy to take out and clean. A safety thermostat, overheating protection and a tip-over switch guard the appliance. At 3.2 kg the heater is light enough to carry to another room.
Specifications
| Product code | 99266 |
|---|---|
| Maximum output | 2,000 W |
| Power settings | 1,000 / 2,000 W |
| Heatable volume | Maximum 60 m³ |
| Temperature setting | 15 °C to 30 °C |
| Timer | 12 hours |
| Oscillation | 80 degrees |
| Dust filter | Yes, removable |
| Protection rating | IPX0 |
| Insulation class | II |
| Power supply | 220/240 V, single phase, 50 Hz |
| Dimensions (w x h x d) | 241 x 604 x 190 mm |
| Weight | 3.2 kg |
Before you buy
- The dust filter is removable, and cleaning it is a job you do yourself.
- With a rating of IPX0 the heater has no protection against water.
- The filter catches dust. The appliance is not an air purifier and has no separate fan setting without heat.
Manual and documents
The manufacturer's manual and product sheet are on our specialist site olimpia-air.com (site in Dutch): documents for the Caldo Trendy T.
Reviews
There are no reviews yet.