Carbon Black infrared heater with carbon fibre elements
At a glance
Infrared lamps made of carbon fibre do the heating in the Carbon Black. This technique turns the electricity mainly into heat and gives off little light, which according to the manufacturer results in a gentle warmth. The maximum room volume stated is 45 m³.
How you use it
Operation could hardly be simpler: mechanical buttons switch between the two settings of 550 W and 1,100 W. Turn on the oscillation and the heater sweeps through 90 degrees, so the warmth covers a wider part of the room. A safety thermostat is fitted, and a tip-over switch turns the appliance off if it falls. The heater weighs 2.2 kg and has a handle, so taking it along to another room is no effort. It is 320 mm wide, 640 mm high and 240 mm deep, and it runs on a mains supply of 220 to 240 V. Because the product sheet names neither a room thermostat nor a timer, the heater keeps working at the chosen setting until you switch it off yourself.
Specifications
| Product code | 99579 |
|---|---|
| Technology | Infrared, carbon fibre |
| Power settings | 550 / 1,100 W |
| Heatable volume | Maximum 45 m³ |
| Oscillation | 90 degrees |
| Power supply | 220/240 V, single phase, 50/60 Hz |
| Dimensions (w x h x d) | 320 x 640 x 240 mm |
| Weight | 2.2 kg |
Before you buy
- The product sheet mentions no room thermostat and no timer. Switching the heater on and off is up to you.
- The manufacturer does not state a protection rating against water.
Manual and documents
The manufacturer's manual and product sheet are on our specialist site olimpia-air.com (site in Dutch): documents for the Carbon Black.
Reviews
There are no reviews yet.