Olimpia Splendid Caldo Sky G WiFi: ceramic bathroom fan heater with app, in green
The Caldo Sky G WiFi is a 2000 W ceramic wall-mounted fan heater for the bathroom, WC or utility room. You control it with the touch display on the unit, the supplied remote control, the OS Home app on your smartphone or by voice. Switch it on from your bed and the bathroom is warm before you step into the shower. With IP22 protection, weekly programming and open-window detection, this is the most complete WiFi bathroom fan heater in the Olimpia Splendid range.
This version is green (Caldo Sky G). The same unit is also available in blue (Caldo Sky B WiFi). We deliver this heater free of charge to every country we ship to.95 to other EU countries; usually 3–5 working days. Free delivery from €199.
Why the Caldo Sky WiFi?
- Ceramic heating element: heats up in seconds, does not glow and spreads the warmth evenly. No burnt-dust smell as with a wire element.
- 2000 W in three settings: fan only, 1000 W or 2000 W. A bathroom of 6 to 12 m² (up to 60 m³) reaches temperature in 10 to 15 minutes.
- Motorised louvre with auto-swing: the warm air sweeps through the room instead of blowing at a single spot.
- IP22 and wall mounting: protected against dripping water, it hangs out of the splash zone and takes up no floor space. Nothing stands on the floor that could tip over or end up in a puddle.
- Thermostat and weekly programme: adjustable from 18 to 45 °C. The unit switches off once the temperature is reached and switches on and off automatically at the set times.
- Open-window detection: if the temperature drops suddenly because a window has been opened, the unit switches itself off.
- WiFi, app and voice control: the OS Home app (iOS and Android) works with common voice assistants such as Google Assistant and Amazon Alexa. Handy when your hands are wet.
- Double safety: safety thermostat plus overheating protection.
Where can a bathroom fan heater be mounted?
The bathroom is divided into electrical safety zones. An IP22 electric heater is mounted outside zones 1 and 2: at least 60 cm from the edge of the bath or shower, high on the wall, with a free air outlet and at least 50 cm clearance from the ceiling, curtains and towels. The socket must also be outside zone 2; 2000 W runs on a normal 16 A circuit protected by a 30 mA residual current device (RCD).
Installed in a quarter of an hour
- Choose a spot outside zones 1 and 2, preferably opposite the shower, so that the warm air reaches the whole bathroom.
- Screw the supplied bracket level onto the wall (masonry: 6 mm wall plugs, plasterboard: cavity wall plugs).
- Hang the unit on the bracket and plug it into a socket outside the splash zone.
- Download the OS Home app, connect the unit to your 2.4 GHz WiFi network and set the weekly programme.
Control: touch display, remote, app and voice
The unit itself has a touch display with temperature readout. The remote control also works from the bath. In the OS Home app you set for each day when the bathroom should be warm, see the current temperature and switch the unit on while you are out. If you have a Google Nest or Alexa speaker at home, simply ask for the bathroom to be heated.
How much does it use?
At full power the Caldo Sky uses 2 kWh per hour. In practice a bathroom fan heater only runs briefly: 15 minutes of preheating and 10 minutes while you shower. Thanks to the thermostat and weekly programme you never heat unnecessarily.
Technical specifications
- Type: ceramic wall-mounted fan heater for the bathroom
- Colour: green
- Maximum output: 2000 W
- Settings: fan only / 1000 W / 2000 W
- Heating element: ceramic (PTC)
- Thermostat: adjustable 18 to 45 °C
- Timer: weekly programme via touch display and app
- WiFi: OS Home app (iOS and Android), 2.4 GHz; voice control via common assistants
- Safety: safety thermostat, overheating protection, open-window detection
- Motorised louvre with auto-swing
- Touch display and remote control
- Protection rating: IP22
- Suitable for rooms up to: 60 m³
- Dimensions (W × H × D): 550 × 180 × 125 mm
- Weight: 2.3 kg
- Power supply: 220-240 V, 50 Hz, plug
- Mounting: wall bracket included
- Manufacturer part number: 99265
- EAN: 8021183996258
Blue or green?
Technically the Caldo Sky B and Caldo Sky G are identical; only the colour differs. The soft mint green goes well with wood, white and natural tones, as in the lifestyle photo; if you want a cheerful accent, choose the blue version: Caldo Sky B WiFi in blue.
About Olimpia Splendid
Olimpia Splendid is an Italian manufacturer of climate control appliances with more than 65 years of experience. Instalpunt supplies the original products with the manufacturer's warranty. We deliver this heater free of charge to every country we ship to.95 to other EU countries; usually 3–5 working days. Free delivery from €199.
You may also like
- All Olimpia Splendid electric heaters and wall fan heaters
- Caldo Up T ceramic wall fan heater 2000 W: the same class without WiFi, with remote control and timer
- Caldo Duo wall fan heater 2000 W: the budget choice for the utility room or garage
- Caleo Glass WiFi convector heater 2000 W: silent and app-controlled, for the living room or bedroom
Reviews
There are no reviews yet.