Olimpia Splendid Caldo Sky B WiFi: ceramic bathroom fan heater with app, in blue
The Caldo Sky B WiFi is a 2000 W ceramic wall-mounted fan heater for the bathroom, cloakroom or utility room. You control it via the touch display on the unit, the supplied remote control, the OS Home app on your smartphone or by voice command. Switch it on from your bed and the bathroom is warm before you step into the shower. With IP22 protection, a weekly programme and open-window detection, this is the most complete WiFi bathroom heater in the Olimpia Splendid range.
This version is blue (Caldo Sky B). The same unit is also available in green (Caldo Sky G WiFi). Instalpunt ships from its own stock. We deliver this heater free of charge to every country we ship to.95 to other EU countries; usually 3–5 working days. Free delivery from €199.
Why the Caldo Sky WiFi?
- Ceramic heating element: heats up in seconds, does not glow and spreads the heat evenly. No burnt-dust smell as with a wire element.
- 2000 W in three settings: fan only, 1000 W or 2000 W. A bathroom of 6 to 12 m² (up to 60 m³) reaches temperature in 10 to 15 minutes.
- Motorised louvre with auto-swing: the warm air sweeps through the room instead of blowing at one spot.
- IP22 and wall mounting: protected against dripping water, hangs outside the splash area and takes up no floor space. Nothing on the floor that can fall over or end up in a puddle.
- Thermostat and weekly programme: adjustable from 18 to 45 °C. The unit switches off once the temperature is reached and switches on and off automatically at the set times.
- Open-window detection: if the temperature suddenly drops because a window is open, the unit switches itself off.
- WiFi, app and voice control: the OS Home app (iOS and Android) works with common voice assistants such as Google Assistant and Amazon Alexa. Handy when your hands are wet.
- Double safety: safety thermostat plus overheating protection.
Where can a bathroom fan heater be mounted?
The bathroom is divided into safety zones. An IP22 electric heater is mounted outside zones 1 and 2: at least 60 cm from the edge of the bath or shower, high on the wall, with an unobstructed air outlet and at least 50 cm clearance from the ceiling, curtains and towels. The socket must also be outside zone 2; 2000 W runs on a normal 16 A circuit with a 30 mA residual current device (RCD).
Installed in a quarter of an hour
- Choose a spot outside zones 1 and 2, preferably opposite the shower, so that the warm air reaches the whole bathroom.
- Screw the supplied bracket level to the wall (masonry: 6 mm wall plugs, plasterboard: cavity wall plugs).
- Hang the unit on the bracket and plug it into a socket outside the splash area.
- Download the OS Home app, connect the unit to your 2.4 GHz WiFi and set the weekly programme.
Control: touch display, remote, app and voice
The unit itself has a touch display with temperature readout. The remote control works even from the bath. In the OS Home app you set for each day when the bathroom should be warm, see the current temperature and switch the unit on while you are out. If you have a Google Nest or Alexa speaker at home, simply say that the bathroom should warm up.
What does it cost to run?
At full power the Caldo Sky uses 2 kWh per hour. In practice a bathroom heater only runs briefly: 15 minutes of pre-heating and 10 minutes while you shower. What that costs depends on your electricity price. Thanks to the thermostat and weekly programme you never heat unnecessarily.
Technical specifications
- Type: ceramic wall-mounted fan heater for the bathroom
- Colour: blue
- Maximum output: 2000 W
- Settings: fan only / 1000 W / 2000 W
- Heating element: ceramic (PTC)
- Thermostat: adjustable 18 to 45 °C
- Timer: weekly programme via touch display and app
- WiFi: OS Home app (iOS and Android), 2.4 GHz; voice control via common assistants
- Safety: safety thermostat, overheating protection, open-window detection
- Motorised louvre with auto-swing
- Touch display and remote control
- Protection rating: IP22
- Suitable for rooms up to: 60 m³
- Dimensions (W × H × D): 550 × 180 × 125 mm
- Weight: 2.3 kg
- Power supply: 220-240 V, 50 Hz, plug
- Mounting: wall bracket included
- Manufacturer part number: 99264
- EAN: 8021183992649
Blue or green?
Technically the Caldo Sky B and the Caldo Sky G are identical; only the colour differs. The fresh blue makes the unit an accent in a white or grey bathroom; if you prefer a calmer shade, choose the green version: Caldo Sky G WiFi in green.
About Olimpia Splendid
Olimpia Splendid is an Italian manufacturer of climate control appliances with more than 65 years of experience. Instalpunt supplies the original products with manufacturer's warranty. In-stock items usually arrive within 3–5 working days, made-to-order items within 5–7 working days (a longer lead time is shown on the product page). We deliver this heater free of charge to every country we ship to.95 to other EU countries; usually 3–5 working days. Free delivery from €199.
You may also like
- All Olimpia Splendid electric heaters and wall fan heaters
- Caldo Up T ceramic wall fan heater 2000 W: the same class without WiFi, with remote control and timer
- Caldo Duo wall fan heater 2000 W: the budget choice for the utility room or garage
- Caleo Glass WiFi convector heater 2000 W: silent and with app, for the living room or bedroom
Reviews
There are no reviews yet.